RPS-600 Wireless Power Supply incl. 4 Powepacks

The RPS-600 wireless power supply is a system designed for tattooing
without cords attached to the tattoo machines or the foot
switch. Powerpacks are made with leading edge battery
technology weighing only 65 grams designed not to interfere
with the hand more than the machine normally does. Once
the machines are rigged with Powerpacks the main unit will
sense which machine is picked up and recall the settings for
that machine. High capacity batteries allows aprox 5 hours

Out of stock

The RPS-600 wireless power supply is a system designed for tattooing
without cords attached to the tattoo machines or the foot
switch. Powerpacks are made with leading edge battery
technology weighing only 65 grams designed not to interfere
with the hand more than the machine normally does. Once
the machines are rigged with Powerpacks the main unit will
sense which machine is picked up and recall the settings for
that machine. High capacity batteries allows aprox 5 hours
of effective running time and charging takes about one hour.
Communications between the units are by radio for optimal
reliability and performance. To make the system complete
we incorporated functions like Kickstart and Boost mode.
Kick start allows the machines to start easy and run at low
voltage. Boost mode actively controls the voltage to maintain
the same speed during various loads and increases the
machine power significantly. In short the RPS-600 is a complete
system to control and combine your tattoo machines
whether it’s a Dragonfly, Stingray or a coil machine.
The RPS-600 can handle up to 6 machines with wireless Powerpacks.
 

 

Specifications

Output Wireless: 5-13V
Output Cable: 4-18V
Compatibility by cable: Various machines and foot switches
Connections: ¼ phono (6.35mm)
LCD display: 2.7” 60x33mm
Powerpack Weight: 65g
Powerpack Capacity: Aprox 5 hours each
Powerpack Battery life: Aprox 500 charging cycles
Powerpack compatibility: Dragonfly / Stingray
Powerpack Charging: Aprox 1 hour
Footswitch: Wireless included
USB: YES (Only for software upgrades)
Operating temp: 10-35 ̊C Indoor use only
Input Power: 100-240V 50-60Hz

 

Package Includes:

1  RPS-600 main unit
1  WFS Wireless foot switch
4  Powerpacks

1  Power adapter 24V including power cord
1  USB cable
1  Custom fitted plastic case

All you need to get wireless with your Dragonfly or Stingray machines. Get extra Powerpacks if you use more machines here

Made In Sweden
RPS-600 is patent pending and design protected.

AVAILABLE NOW

The TPS-500 X2 is our Third gen wireless power supply.

 

 

Read More

Merchandise

Spare Parts 

Shop Now

Spare Parts

 

Read More

Shipping Info